Toll Free-
1 (866) 419-8453
| Finish | Required Products | Application Overview |
|---|---|---|
| Textured Stone (CCMC) |
* Flexstone Base * Flexstone AR Top Coat * Flexstone Chips * Flexstone Clear Coat * Flexstone Primer (for concrete, PT plywood, and torch-on surfaces) * Flexstone Seam tape (for plywood surfaces) |
Begin with the primer coat (if needed), mix components (A+B) together and roll out a thin layer. Wait 2-4 hours and begin mixing and the Flexstone base with water (1:4 water to base). Spread evenly with your trowel. Wait 24 hours and apply AR top coat with roller. Broadcast chips into AR top coat while it is still wet. Wait 24 hours. Sand surface to desired coarseness. Sweep / Vacuum. Apply a thin coat of Flexstone Clear Coat. Wait 24 hours and enjoy. |
| Standard Colour |
* Flexstone Base * Flexstone AL Top Coat * Fine silica sand (20-30- grit) * Flexstone Primer (for concrete, PT plywood, and torch-on surfaces) * Flexstone Seam tape (for plywood surfaces) |
Begin with the primer coat (if needed), mix components (A+B) together and roll out a thin layer. Wait 2-4 hours and begin mixing and the Flexstone base with water (1:4 water to base). Spread evenly with your trowel. Wait 24 hours and apply AL top coat with roller. While rolling, broadcast and back-roll silica sand evenly to create a slip resistant finish Wait 24 hours and enjoy. |
The product calculator below will allow you to quickly figure out exactly how much product you will need for your job. Just simply input your sundeck size (square feet) into the YELLOW box at the bottom of the spreadsheet. While you're at it, you will notice that we have also listed the tools you will need to do your job.